•  Call Us: +421 919 225 799

  •  Email: office@gluestream.eu

PBSU-3000 UNIVERSAL BAND SAW

band_saw_sips_mgo_eps_cutter_1521167091
Universal band cutting saw for MGO SIPs with automatic conveyor and measurement system with 0-45 degree inclination ...Read more
Universal band cutting saw for MGO SIPs with automatic conveyor and measurement system with 0-45 degree inclination
  • Description
  • Specifications

Universal band cutting saw for MGO SIPs with automatic conveyor and measurement system with 0-45 degree inclination

Panel sizing band saw is designed for 0-45 degree cutting of SIPs with OSB, MGO (Magnesium Oxide Boards), Fibre Cement boards, Green Boards and other fibre reinfroced materials, which cannot be cut with specialized circular cutting blades.

Main benefits of the Band Saw compared with Circular Saw:

1. No need of extra expensive vacuum aspiration unit, less dust, less noise: The width of band saw blade is 2-3mm, instead of 8-10mm of circular blade (800-900 diameter). This means that the volume of the dust and chips to be extracted with aspiration unit is 3 times less, excludes the need to purchase extra-high output vacuum aspiration unit, which can cost equal to the price of the cutting machine for SIPs;

2. More cutting thickness of the panel on the entire 0-45 degrees: The maximum diameter of the circular cutting blade, which is available on the market for this specialized purpose is 900mm and this diameter follows the fact, that the maximum thickness of the panel which can be processes at 45 degree angle is 320mm. The maximum thickness of the panel which can be cut by band saw in whole range of 0-45 degrees is 400mm and can be even more;

3. More safe and applies to European safety regulations: Band cutting blades have less inertia as the weigth of the cutting blade is less than circular blade spreaded by whole cycle of the drive and its easier to provide emergency stop during full output performance. As well as less weigth and inertia of the blade requires less power of drives, less power consumption;

4. More reliable and cheap spares: band saw blade has more cutting contact length and surface than circular blade, which means it has less chances to be overheated and damaged during cutting, as well as the band cutting blades we use are desinged to cut the concrete and stone slabs.

More features:

  • Interlocked perimeter guard around the back of the saw; 
  • Electronic brake motor; 
  • Emergency stops at the edges of the feed-table;

Cutting band saw is equipped with a dust collection system and can be optionally equipped with Jib Crane for loading and unloading of the panels.

All Gluestream machinery is equipped with a remote access module, providing the customer with 24/7 online internet support.

Please, contact us if you need to get our technical support and we will share our knowledge with you. Our team has a great experience in sandwich panel production and cutting technology, gained over the years.

Related products

BS-750 IC BAND SAW

Panel sizing band saw for angle cutting of Jumbo SIPs. 

RTF-7500 FLIPPER

Sandwich panel flipping machine

SRT-7500 TILTER

Sandwich panel tilting machine

FPS XL-6500 SIP

Panel sizing saw for large sandwich panel (SIP) processing with automatic cutting angle adjustment

FPS 3.0 CNC CUTTING CENTER

Processing center for sandwich panel (SIP) panels

FPS-900 BC

Panel sizing saw for sandwich panel (SIP) processing with automatic feeding conveyor and cutting angle adjustment

FPS-900 ST

Panel sizing saw for sandwich panel (SIP) processing with automatic cutting angle adjustment, with stationary operation table

HWC 3.0 HOTWIRE CNC

CNC hot-wire EPS cutting machine

SPL-1XL SIP PRODUCTION LINE

Jumbo sandwich panel (SIP) production line with motorized belt conveyor and P-type pneumatic press

SPL-10S 1C PUR ADHESIVE APPLICATOR

Portal type stationary 1-component polyurethane (1-C PUR) automatic adhesive applicator

SPL-10M SANDWICH PANEL PRODUCTION LINE

Sandwich panel production line with motorized roller conveyor combined with several P-type presses.

SPL-9 1C PUR APPLICATION MACHINE

One-component PUR (1-C PUR) adhesive automatic application machine

SPL-9 2C PUR APPLYING MACHINE

Two-component 2C PUR (2-C PUR) adhesive automatic applying machine

SPL-2 SANDWICH PANEL PRODUCTION LINE

Sandwich panel (SIP) production line with two driven carriages and two P-type pneumatic presses

SPL-1 SANDWICH PANEL PRODUCTION LINE

Sandwich panel (SIP) production line with one driven carriages and one P-type pneumatic presses

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.